Floor-standing engraving and cutting CNC Router machine for milling and engraving (professional use)
Working Area
2500mm x 1300mm x 200mm (Length x Width x Height).
Mixed vacuum area of 6 PVC and T-slot areas
Vacuum pump
Air-cooled vacuum pump 5.5Kw.
Table
T-slot Aluminum Table.
Spindle
Air-Cooled spindle 9Kw 220V 400Hz. Inverter for 11Kw Spindle Controlling from 0 to 24000RPM via Software.
Collet Type: ER32
Tool Change
Automatic tool change system (ATC), with 6-seat parking.
Transmission and sliding
Full supported Hiwin Rails with Linear Bearings high-stress square rail, 25mm
Transmission type on X, Y axes: spiral-gauge (1.25M).
Transmission type on the Z axis: with ball screw, 25mm, for zero gaming.
Motors and drivers
AC Servo Motors and Drives.
Electronics Cabinet
Independent wheel table for ventilated electronics, filters, with self-contained control and controller for motion control.
Home
Terminal - home, inductive switches on the home side of each axis.
Cable Management
Drag Chain (X & Y axes).
Speed Movement
≤40m/min.
Voltage
3PH, 380V, 50/60HZ.
Conveniences
Automatically engages a dust and brush suction system controlled pneumatically.
Automatic tool measurement system.
Woolen blanket rail protection from dust and braziers
Automatic oil lubrication system of the machine with an installed aluminum pipe network.
Auxiliary loading roller.
Dual Bag Dust Collection Device.
Support
2 video tutorials for CAM engine software, in Greek.
Not included
The machine for its operation requires an air pressure system not included in the offer.
Machine dimensions
~3300mm x 2200mm x 1750mm.
Machine weight
~ 1800Kg
Warranty
2 Years
_____________________________________________________________________
CNC CAT-3700L